QuickTake 100 (1994)

The QuickTake 100 is considered one of the first consumer digital cameras and was only available for about one year, from 1994 to 1995. The QuickTake 100 model was replaced by the QuickTake 150 in 1995 (using the same design) and then the QuickTake 200 in 1996 (a new design manufactured by Fuji).

The camera had 5 button controls: one to control the shutter, and four surrounding a small black/gray LCD panel on the back to control flash, resolution, self-timer, and a recessed button to delete all photos.

The camera sold for $749 and could take eight photos at 640×480 resolution, 32 photos at 320×240 resolution, or a combination of the sizes in 24-bit color. Although the QuickTake 100 had a built-in flash, it had no zoom or focus controls, nor could it preview or delete individual photos from the internal memory. Photos were downloaded to a computer using a serial cable and included QuickTake software. The QuickTake software also included functions such as rotate, resize, crop, and export.

After the Macintosh version of the QuickTake 100 was released, a Windows version followed six months later.

QuickTake cameras also included several accessories, such as a leather cover with a hand strap, a neck strap, a leather case, a battery booster pack (shown here), and a snap-on close-up lens.

Source: Wikipedia

iPhone 7 Plus Silicone Case (Denim Blue, 2016)

According to Apple’s website, “Designed by Apple to complement your iPhone, the form of the silicone case fits snugly over the volume buttons, side button, and curves of your device without adding bulk. A soft microfiber lining on the inside helps protect your iPhone. On the outside, the silky, soft-touch finish of the silicone exterior feels great in your hand.”

This case was purchased to protect my iPhone 7 Plus in Jet Black (the gloss black version of the iPhone 7 Plus). The same case also fit the next “Plus” iPhone, the iPhone 8 Plus, and Apple began to refer to the product as the iPhone 8 Plus/7 Plus Silicone Case.

The case was released in Midnight Blue, Pink Sand, Sea Blue, Black, Cocoa, Ocean Blue, Denim Blue, (PRODUCT)RED, Stone, and White.

Source: Apple

iPad Smart Case (dark gray, unopened, 2011)

The iPad Smart Case was available for the iPad Generation 2, 3, and 4. The outer case was made of polyurethane and the interior has a microfiber lining. Magnets built into the case allowed it to automatically wake when opened and sleep when closed. The cover could be folded into a stand to allow for viewing in an upright position or typing and drawing in a lower position.

The iPad Smart Case was available in (PRODUCT)RED, dark gray, light gray, pink, green, and light blue.

Because the part number begins with PD, it indicates that this case has been personalized. Because it is unopened, it is not clear what the personalized printing reads.

Source: B&H Photo/Video, Best Buy