Skip to content

mattjfuller.com

ed tech | design | music

  • mattjfuller.com
  • Résumé
  • Sketchnotes
  • Music
  • Shows
  • Apple Collection

Tag: Apple logo

Posted on January 1, 2026

Neon Apple Logo (October 2014)

Back in 2014, I contacted Neon Shop Fishtail, a well-known neon shop in Chicago, and inquired about the possibility of fabricating a neon Apple logo for my home.

I contacted the general email address on the website and quickly received a response from Tom Brickler, whom I later learned is the owner of the shop. I sent a Photoshop mockup of the idea I was envisioning. He told me that he liked the project and that he could start it later that week. 

On a whim, I asked if the shop allowed customers to watch the fabrication of projects. I was very surprised when he invited me the next Friday afternoon. They not only allowed me to watch the fabrication, but they very generously allowed me to take photos and video, all captured on my iPhone 6—my personal iPhone at the time.

The experience was fascinating to watch, and it became immediately clear that the three men involved in the project were extremely skilled craftsmen. Before I arrived, neon artist John Noga had already shaped three pieces of the logo, but he had not yet fused them together. I was able to watch him create the leaf part of the logo from a straight white glass tube. He then trimmed and joined the larger pieces to form the lower apple part of the logo with the top, bottom, and “bite.”

The next step was to bring the project to the shop basement where the two pieces were electrified with 15,000 volts of electricity, heating them to 550˚F to burn out the impurities inside the glass. The white tubes were then pressure-filled with argon gas so, when electrified, the piece would produce a white glow. 

The last two steps, completed by Chevo Carreño, included “burning in” the tubes with electricity so the entire shape would glow evenly. As the burning-in commenced, it was easy to follow the path of the glow getting brighter until the entire piece was even. He finished the project by painting the non-glowing parts of the tubes with a foul-smelling substance that effectively blocked out the light. He let me select the color, and I went with gray. I was also able to select the wire color and chose white. 

I took the logo home that day.

About one month later, I finished the installation with help from my then-neighbor and owner of a painting company, Alex Tenuta. The logo is supported by clear plastic clips attached to the wall, and the wiring is a simple series circuit that attaches to a dimmable transformer that plugs into a standard outlet. The logo is mounted on the half-wall of my loft, about 15 feet up.

Tom Brickler, also known as “Neon Tom,” named Neon Shop Fishtail after a fishtail ribbon burner used for making sweeping curved bends with glass over fire. After nearly 40 years, he describes his business as strong with “work in the major motion picture industry, business signs, custom art for residential, and signage for the industry.” The website adds, “We specialize in making our own signs in the handmade custom way neon is made and take great pride in what we do!”

Neon Shop Fishtail is located at 2247 North Western Avenue on Chicago’s north side, and handmade work can be viewed in the store. Brickler invites anyone to visit, “even if you are not in the market for a neon sign…after coming in, you will now be noticing neon everywhere, and hopefully you will come up with an idea that we can create in light.”

I distinctly remember recording the process at Neon Shop Fishtail, and to this day I very much appreciate that they timed the completion so I could watch and learn part of the process. I still remember how effortless they made process seem and the obvious experience and artistry in every step. I also remember being surprised by the specialized tools and open flames that were burning around the shop in unexpected locations.

Using my many clips, I created a “making of” video back in 2014 and posted it on YouTube. Neon Shop Fishtail has included on the front page of their website since I sent them the link in 2014. Over 10 years later, my video has well over 14,000 views—BY FAR the most views of any video I have ever made!

See the video on YouTube.

Of course, this neon artwork is not an official Apple product, but I consider it among my most prized Apple collection items.

Source: Neon Shop Fishtail

Posted on November 30, 2024November 30, 2024

Apple Logo Lapel Pin (Violet, Apple Distinguished School, 2024)

Apple describes the Distinguished Schools program:

“Apple Distinguished Schools are centers of leadership and educational excellence ​that demonstrate Apple’s vision for learning with technology — and we believe they are some of the most innovative schools in the world.”

As of November 2024, Apple reported that there were 889 Apple Distinguished Schools in 37 countries. The district where I serve as an educational technology leader is proud to have three Apple Distinguished Schools.

This Apple logo lapel pin is violet, a shade of purple matching one of the stripes on Apple’s classic six-color logo. The pin package is wrapped in clear plastic and attached to a 3 x 3-inch black cardboard backing that is printed in white with the words [Apple logo] Distinguished School.

The pin is made from metal with a polished chrome finish. The pin is approximately 2 mm thick, 3/4-inch across, and 7/8-inch tall. The pin is held in place from the back by a silver butterfly clutch.

Source: Apple, Wikipedia

Posted on January 8, 2022January 15, 2023

Embroidered Appliqués (multicolor thread, 1993)

These multicolor Apple logos are made from embroidery thread and have an adhesive back. One set of embroidery stickers are on a transparent plastic film with the adhesive still tacky, and another set are separate with dried adhesive on the back. The adhesive on the separated stickers is yellowing.

This product is featured on page 59 of the Spring 1993 Starting Line: Apple Marketing Communications Catalog. Its description reads:

Embroidered Appliqués
Wear our adhesive-backed, embroidered logo appliqués proudly on your lapel, or add them to the cover of event materials. They’re outstanding giveaways. 250 per roll. APL520

Because the stickers are made primarily of thread, each has a slightly different shape, especially the individual stickers with hardened adhesive backs. The individual sticker dimensions vary, but the least-distorted example measures 20mm x 25mm for stickers on the plastic backing, and 18mm x 23mm off the backing.

Posted on January 6, 2020April 28, 2020

Apple Wristbands (c. 2015)

One year while visiting a Chicago-area Apple Store coincidentally on Halloween, I noticed that Apple Store employees were giving away Apple-logo items to Trick-or-Treaters. I waited until after designated Trick-or-Treat hours were over, spoke to an employee, let him know I was a collector, and asked for one of the “treats.” The first year I discovered this Apple-logo item giveaway, they were giving plastic Apple-logo flashlights. I have since visited Apple Stores on a few other Halloweens and, for at least two years in a row, they were giving these LIVESTRONG-style wristbands.

These Apple wristbands were from approximately 2015, and I got them at the Northbrook Court Apple Store. They are child-size rubber bracelets in either orange or white with an embossed Apple logo. They measure approximately 60 mm in diameter and are 12 mm wide.

Source: None available

Posted on January 6, 2020April 28, 2020

Apple Logo Mousepad (blueberry, 1999)

This thin plastic mousepad made from materials by the company Microthin features the blueberry Apple logo printed in a manner to simulate the translucent plastic Apple used in the iMac line of computers at the time. This mousepad is blue to match the blueberry iMac. Other versions of this design were available in the other five iMac colors: tangerine, lime, strawberry, grape, and graphite.

This mousepad is round and measures 8.5 inches in diameter. It is printed with a MICROTHIN PRODUCTS logo and small text along the bottom curve (in Apple Garamond font): ©1999 Apple Computer, Inc. All rights reserved. L04108A

The bottom of the mousepad is covered in printed dots that provide traction to prevent slippage. The stickiness (tackiness) of the material is still viable after about 20 years and can be reactivated by rinsing any accumulated dust with water. However, the entire mousepad is beginning to show signs of yellowing.

Source: No official sources found, additional colors confirmed on eBay

Keywords

  • 44mm
  • 45mm
  • 2003
  • 2005
  • 2007
  • 2020
  • 2021
  • 2022
  • 2023
  • aluminum
  • Apple Watch
  • band
  • black
  • blue
  • case
  • CD
  • CD-ROM
  • collectible
  • education
  • Fitted
  • hook-and-loop
  • iMac
  • iPad
  • iPhone
  • iPod
  • jb
  • leather
  • logo
  • Macintosh
  • magnet
  • nylon
  • packaging
  • pen
  • silicone
  • Size 12
  • Solo Loop
  • Sport Loop
  • stainless steel
  • t-shirt
  • ultracomfortable
  • unopened
  • USB
  • watch
  • white
  • Wi-Fi
Proudly powered by WordPress