iPhone 7 Plus (128 GB, jet black, 2016)

This particular iPhone 7 Plus model was used with an AT&T network in the United States. All iPhone 7 Plus models used a 5.5-inch widescreen multitouch Retina HD display at 1920×1080 (401 ppi). It used a taptic-engine that provided a clickless Home button. The iPhone 7 Plus used three cameras: two rear 12-megapixel cameras (one with a wide-angle and one with a 2x telephoto lens) and a front FaceTime HD camera (7 megapixels and 1080p).

The iPhone 7 Plus was originally available in five color options: silver (white glass front and a silver back), gold (white glass front and a gold back), rose gold (white glass front and a pink-tinted gold back), black (black glass front and a matte black back), and jet black (black glass front and a high-gloss anodized and polished black aluminum back). On March 21, 2017, Apple added a (PRODUCT) RED Special Edition with a white glass front and a red aluminum back.

The iPhone 7 Plus was splash, water, and dust-resistant (but not waterproof). It had a Lightning port, but lacked a headphone jack.

Internally, the iPhone 7 Plus used a 64-bit Apple A10 Fusion processor with four cores; 3 GB of RAM; and 32, 128, or 256 GB of storage. It supported 802.11a/b/g/n/ac Wi-Fi, Bluetooth 4.2, LTE (4G), and NFC for Apple Pay.

Source: EveryMac.com

iPad (Generation 3, cellular, 32 GB, white, 2012) with iPad Smart Case (green)

The iPad Generation 3 was significantly more powerful than the two previous iPad models and introduced the “Retina” display, a 9.7-inch multitouch screen at 2048×1536 (264 ppi). Internally it used a dual-core 1 GHz Apple A5X processor with quad core graphics; 1 GB of RAM; 16, 32, or 64 GB of storage; a rear-mounted 5 megapixel iSight camera (1080p); a front-mounted FaceTime camera; 802.11n Wi-Fi, and Bluetooth 4.0.

This specific iPad model supported 4G LTE connectivity on Verizon’s network in the US.

According to Cult of Mac, the iPad Generation 3 had the “shortest lifespan of any iPad in history. Apple debuted the fourth-gen model just 221 days after the iPad 3 went on sale. The iPad 4 added the Lightning connector, making the iPad 3 the last iPad to support the old 30-pin dock connector.”

The Smart Case for was made of polyurethane and fit several iPad models including iPad 2 (2nd generation), iPad (3rd generation), and iPad with retina display. The Smart Case offered full protection and the cover was magnetic so when the case was open the iPad woke up and automatically went to sleep when closed.

The interior of the case was made of a soft, color-matched microfiber lining that helped keep the display clean. By folding the cover into a triangle, Apple advertised the case positions as a “FaceTime and movie stand” while upright and a keyboard stand to “tilt iPad into a comfortable typing position” when flat.

Sources: EveryMac.com, Cult of Mac

iPad (Generation 3, Wi-Fi, 16 GB, black, 2012, unopened)

The iPad Generation 3 was significantly more powerful than the two previous iPad models and introduced the “Retina” display, a 9.7-inch multitouch screen at 2048×1536 (264 ppi). Internally it used a dual-core 1 GHz Apple A5X processor with quad core graphics; 1 GB of RAM; 16, 32, or 64 GB of storage; a rear-mounted 5 megapixel iSight camera (1080p); a front-mounted FaceTime camera; 802.11n Wi-Fi, and Bluetooth 4.0.

In my experience as a school Technology Director, the iPad Generation 3 began a shift in thinking that the iPad was not just a content-consumption device, but also a content-creation device. The iPad Generation 3 built upon the iWork apps introduced with he original iPad and camera introduced with the iPad Generation 2 by adding a considerably faster processor and better screen. Soon after the release of the iPad Generation 3, many schools began implementing multiple iPad devices eventually leading to 1:1 initiatives where each student is issued an iPad for learning.

According to Cult of Mac, the iPad Generation 3 had the “shortest lifespan of any iPad in history. Apple debuted the fourth-gen model just 221 days after the iPad 3 went on sale. The iPad 4 added the Lightning connector, making the iPad 3 the last iPad to support the old 30-pin dock connector.”

Source: EveryMac.com, Cult of Mac

iPad mini (Generation 2, 16 GB, black, 2013, unopened)

The iPad mini 2 was originally referred to as “iPad mini with Retina Display.” It featured a 7.9-inch 2048×1536 (326 ppi) display; a dual core 1.3 GHz Apple A7 processor; 1 GB of RAM; and 16, 32, 64, or 128 GB of storage. The iPad mini 2 was available in white (with a silver back) or black (with a medium gray gunmetal back).

The iPad mini 2 included two cameras: a rear-mounted 5 megapixel iSight camera (1080p) and a front-mounted 1.2 megapixel FaceTime HD camera (720p), dual-band 802.11a/b/g/n Wi-Fi, Bluetooth 4.0, two microphones, and two speakers. This iPad used a Lightning port and included a headphone jack.

Source: EveryMac.com

iPhone 6 (64 GB, space gray, 2014)

This particular iPhone 6 model was used an AT&T network (and functioned throughout North America). All iPhone 6 models had a 4.7-inch multi-touch screen at 1334×750 (326 ppi, Retina HD display). It had two cameras: a rear 8 megapixel iSight camera (1080p) and a front 1.2 megapixel FaceTime camera (720p).

The iPhone 6 was originally available in three color options: silver (white glass front and a silver aluminum back), gold (white glass front and a gold aluminum back), and space gray (black glass front and a medium-gray aluminum back). The iPhone used a unibody design with rounded sides (similar to the iPod touch Generation 5). The glass screen curved slightly at the edges. It also included a Touch ID fingerprint sensor.

The iPhone 6 used a 1.4 GHz 64-bit Apple A8 processor with 1 GB of RAM and 16, 32, 64, or 128 GB of storage. In addition to 802.11a/b/g/n/ac Wi-Fi, Bluetooth 4.0/4.2, and LTE (4G), it included NFC for Apple Pay transactions. It had both a bottom-mounted headphone jack and a Lightning port.

Source: EveryMac.com

iMac G5 2.0 20-inch (2005)

The iMac G5 featured a 2.0 GHz PowerPC 970 (G5) processor, 512 MB of 400 MHz PC3200 DDR SDRAM, a 250 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading 8X DVD-R/CD-RW SuperDrive, and built-in stereo speakers at the bottom of the display. The screen was a 20-inch TFT Active Matrix LCD at 1680×1050. Wired ports included FireWire 400 and USB 2.0. Wireless connections included AirPort Extreme (802.11g) and Bluetooth 2.0+EDR.

Like its predecessors, the iMac G5 rested on an aluminum stand with an adjustable hinge. It also supported the VESA (Video Electronics Standards Association) mounting interface standard which allowed the iMac to be mounted directly on a kiosk, wall, or arm. The iMac G5 also had an Ambient Light Sensor under the edge of the display that dims the sleep indicator light when the room is dark.

Source: EveryMac.com

iMac Core 2 Duo 2.0 17-inch (2006)

The iMac Core 2 Duo 2.0 was the second iMac design to use a flat-panel display. It featured a 2.0 GHz Intel Core 2 Duo processor (T7200) (with two independent processor cores on a single chip), 1 GB of RAM (667 MHz DDR2 SDRAM, PC2-5300), a 160 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD+R DL SuperDrive, a built-in iSight video camera, and built-in stereo speakers. The flat panel display was a 17-inch TFT Active Matrix LCD at 1440×900 pixels.

Ports on this iMac included three USB 2.0 ports, two FireWire 400 ports, Gigabit Ethernet, and mini-DVI supporting an external display in extended desktop mode (rather than only supporting mirrored mode). This iMac also included built-in AirPort Extreme support.

Source: EveryMac.com

iMac G4/1.25 20-inch (2003)

The iMac G4/1.25 20-inch Flat Panel featured a 1.25 GHz PowerPC 7445 (G4) processor, 256 MB of RAM (333 MHz PC2700 DDR SDRAM), an 80.0 GB Ultra ATA/100 hard drive (7200 RPM), a tray-loading 4X SuperDrive, support for AirPort Extreme (802.11g)/Bluetooth with optional cards, and a 20-inch TFT Active Matrix LCD display at 1680×1050.

The internal components of this iMac are contained in a 10.6-inch half-sphere. Protruding from the top of the half sphere was a chrome stainless steel neck supporting the display. This design is sometimes referred to as the “sunflower iMac.” In addition to the polished stainless steel, the case and display are “ice white.” It shipped with two clear spherical external Apple Pro Speakers.

This iMac shipped with MacOS X 10.3 Panther and cannot boot into “Classic Mode” (MacOS 9).

Source: EveryMac.com

iMac G4/700 15-inch (flat panel, 2002)

The iMac G4/700 (Flat Panel) featured a 700 MHz PowerPC 7441 (G4) processor, 128 MB or 256 MB of RAM (PC133 SDRAM), a 40.0 GB Ultra ATA/66 hard drive (5400 RPM), either a tray-loading CD-RW drive or DVD-ROM/CD-RW Combo Drive, and a 15-inch TFT Active Matrix LCD display.

The internal components of this iMac are contained in a 10.6-inch half-sphere. Protruding from the top of the half sphere was a chrome stainless steel neck supporting the display. This design is sometimes referred to as the “sunflower iMac.” In addition to the polished stainless steel, the case and display are “ice white.” This iMac also included a matching ice white Apple Pro Keyboard and Mouse. The more expensive Combo Drive configuration of this iMac shipped with two clear spherical external Apple Pro Speakers.

This iMac shipped with MacOS X 10.1 and MacOS 9.2 installed with MacOS X selected as the default OS. 

Source: EveryMac.com

iMac (original, Bondi blue, 1998)

The original iMac was introduced on May 6, 1998, and shipped August 15, 1998. It featured a 233 MHz PowerPC 750 (G3) processor, 32 MB of RAM, a 4.0 GB EIDE hard drive, and a tray loading CD-ROM drive. Its screen was a 15-inch CRT display.

The original iMac was available in one color called “Bondi blue,” named for the blue-green color of the water at Bondi Beach near Sydney, New South Wales, Australia. “Bondi” is an [Australian] Aboriginal word meaning “water breaking over rocks.”

This was the first consumer computer product released after Steve Jobs returned to Apple as interim CEO. The iMac was primarily credited with returning Apple to profitability and re-establishing Apple’s commitment to simplicity and design, but at the time was criticized for dropping the floppy disk drive and adopting the emerging USB standard.

The “i” in “iMac” has been described by Apple to represent “Internet,” but Steve Jobs also specified the “i” to mean internet, individual, instruct, inform, and inspire in a presentation in 1998.

Although the original iMac was not meant to be user-upgradable, it did contain what was referred to at the time as a “mysterious” slot behind the hinged side door called the “Mezzanine” slot. Inside the iMac was a Mezzanine connector soldered on to the motherboard. Officially, Apple never explained its purpose, but a few developers created expansion products that used the slot and/or port. I installed one such port in a few iMac computers in 1999, namely the Griffin iPort that added an Apple serial port and video-out port. Although the Griffin iPort didn’t use the Mezzanine internal connector, it did use the Mezzanine slot to make the ports available.

The Revision A iMac (M6709LL/A) and Revision B iMac (M6709LL/B) are identical with the exception of graphics systems. Revision A (August 15, 1998) had an ATI Rage IIc graphics with 2 MB of VRAM, and Revision B (October 26, 1998) had an ATI Rage Pro Turbo graphics with 6 MB of VRAM.

Source: EveryMac.com, LowEndMac.com, Wikipedia, and Business Insider